When you set up a security camera system, the recorder matters as much as the cameras. The two terms you will see most often are NVR and DVR. This guide explains the difference, which one suits you and how to work out the right drive capacity.
What is a DVR?
A DVR (Digital Video Recorder) works with analogue cameras. Cameras connect to the recorder over coaxial cable, and the video is digitised in the recorder. Thanks to analogue HD technologies such as HDCVI, AHD and TVI, DVR systems can now deliver Full HD and higher. Hybrid recorders that support both analogue and IP cameras are called XVRs.
Advantages: Can reuse existing coaxial cabling; lower upfront cost.
Limitations: Resolution and smart analytics are more limited than IP systems, and each camera needs a separate power cable.
What is an NVR?
An NVR (Network Video Recorder) works with IP cameras. Each camera digitises its own video and sends it over the network to the NVR. With PoE NVRs or switches, a single network cable carries both data and power.
Advantages: High resolution (4 MP, 8 MP and above), smart analytics such as human and vehicle detection, flexible cabling and easy expansion.
Limitations: A slightly higher upfront cost than analogue.
Which should I choose?
| Situation | Recommendation |
|---|---|
| New building or new cabling | NVR + IP cameras |
| Sound coaxial cabling and a tight budget | DVR/XVR + analogue HD cameras |
| Licence plate or face detection needed | NVR + smart IP cameras |
| Gradual migration | XVR (hybrid) |
For new installations we generally recommend NVRs with IP cameras. They offer better resolution, analytics and expansion in the long run.
Channel count
Recorders come with 4, 8, 16, 32 or more channels, one per camera. If you may add cameras later, choose one size up; for example, an 8-channel recorder for 6 cameras.
Drive capacity and recording time
Recording time depends on the number of cameras, resolution, frame rate, compression and the amount of motion. As a rough guide, a 4 MP camera recording continuously with H.265 compression uses about 20–40 GB per day.
For example, 8 cameras with a 30-day target: 8 cameras × 30 GB × 30 days ≈ 7.2 TB. An 8 TB surveillance drive is a sensible starting point.
Recorders should always use surveillance-class drives (Seagate SkyHawk, WD Purple). They are built for continuous 24/7 writing and last far longer than ordinary desktop drives.
Checklist
- Decide the number of cameras and the indoor/outdoor split.
- Check existing cabling (coaxial or network cable?).
- Set your target recording time in days.
- Identify any smart analytics you need.
- Allow for one size up in channels and use surveillance drives.
Send us these details and we will prepare a single quote covering Hikvision or Dahua cameras, recorder, surveillance drives and PoE switches.